基于STM32的蓄电池检测系统设计

蓄电池检测系统是蓄电池质量指标中非常重要的一环,直接影响蓄电池的性能和寿命。本文介绍一种以STM32微处理器STM32F103RCT6为核心的铅酸蓄电池高精度智能检测系统,可以同时检测电压、温度、液位,并根据神经网络计算得到电解液密度,用户在上位机完成测试参数设置,自动对电池的各项数据进行存储和报警。文中详细介绍了系统组成、硬件和软件设计。实践证明该检测系统满足实际需求。     

离线船舶机电设备振动采集仪系统设计

设计了离线振动采集仪的硬件系统，通过对传感器电源模块的进行了节电控制设计，优化振动信号的采集策略和采集节奏，提出了振动信号数据处理和存储方法，实现了无人关注下自主对船舶机电设备振动信号连续近百天的采集任务。应用结果显示，采集仪系统结果准确可靠，实现了全工况的实船振动数据的采集设备。     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.     

减摇复合船型首部构型设计与水池模型试验研究

船舶在波浪中航行时的纵向运动性能是衡量船舶综合航行性能的重要指标.为了改善船舶在波浪中的纵向运动性能,本文基于首部减摇组合附体技术对某型船首部构型进行改造并通过水池模型试验对其静水阻力和耐波性进行了分析研究.在分析该船作业及航区特点的基础上,通过船首部线型改造及减纵摇组合附体构型优化,给出适用于该船的首部构型方案.应用CFD软件和修正切片法进行水动力性能分析,并对船首构型方案进行优选.将优选出的性能较优复合船型方案和原船型开展水池模型静水阻力与耐波性对比试验分析,验证减摇复合船型的静水阻力性能与耐波性能.试验结果表明,改造后的复合船型减纵摇效果明显,对应实船四级海况18节航速下纵摇与首部加速度有义值较原船型降低15%以上;复合船型静水阻力有所增加,实船18节航速下静水阻力增加13.5%.     

Purification effects of C2Cl6 on A00 aluminum

The effects of several fluxes on purification, microstructures and properties of A00 aluminum have been studied. The experimental results and analyses indicate that many cracks and large porosities exist in the surface film above the melt purified by C₂Cl₆ and that the film is floc and mostly composed of Al₂O₃ and pure aluminum, which carries many carbon particles and AlCl₃ not fully volatilized. And then over 50% (mass fraction) of the all-melting residue is pure aluminum, which is one of the major reasons for high melting loss. Moreover, because of a mass of gas bubbles and a state of seethe, there are many inclusions which size is under 10 ??m in the microstructure of A00 aluminum purified with C₂Cl₆ or fluxes containing C₂Cl₆. With this purifying method, the aluminum crystal grains are extended along the radius that was observed firstly and the average crystal size of A00 aluminum are about 100?C150 ??m. In addition, small size inclusions have little affected on tensile strength and micro inclusions under 10 ??m have little affected on elongation.     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

基于ARENA的双车道超车视距设计风险评价

通过计算机仿真软件ARENA模拟双向两车道路段上不同的超车视距长度下的超车行为,并建立风险指标。风险指标主要根据超车动作结束时,超越车与对向车辆间的最短时间距离确定。一共确定了六个风险等级,用于评价不同设计时速下的各种PSD长度的风险。利用此方法可以很直接的评价超车视距设计的优劣。